Cart 0
Invacare Silcraft IH3652G Free standing Whirlpool tub for Assisted Living, now with Pipeless™ technology. CALL for special shipping

InvaCare CCG

Invacare Silcraft IH3652G Free standing Whirlpool tub for Assisted Living, now with Pipeless™ technology. CALL for special shipping

$ 9,240.00 $ 11,419.40
Request Inquiry

The IH3652G or Access 3652G Free Standing, Four Jet Whirlpool Tub

 

 The Access 3652G features a Deluxe Control Console: Users or Caregivers can easily access tub controls in one central location. Fast fill in under 2min reduces bathing prep time so caregivers can focus on the resident. Closed-Loop-Disinfecting-System safely disinfects the entire bathing system. Built-in disinfecting system minimizes the risk of cross-contamination. Anti-scald mixing valve, thermometer, and shower valve provide safe and comfortable bathing.  The Silcraft IH3650 is at home in Assisted Living Facilities and can be caregiver or resident controlled. 

Specification IH3652G Whirlpool tub

Outside Length

67”

Outside Width

32”

Inside Length

53”

Inside Width

27” , Seat width is most of this width.

Door width

38.5”

Seat height

19”,   26" seat width

Fill rate

17 GPM

Hydro message

72-80 GPM flow rate

Weight capacity

Not given, but if you fit, it will hold you.

 

3652G FEATURES

  • Four Whirlpool Jet System
  • Anti-Scald Thermostatic Mixing Valve
  • ·Pipeless™ technology
  • Backflow Preventors
  • Deluxe Control Console
  • Easy to Read & Operate
  • Fast Fill Mixing Valve
  • Shower and Tub Valves
  • No reservoir tank to disinfect
  • Pulsating Shower Wand with multiple settings
  • Thermometer
  • 2” Drain, rated at 25 GPM
  • Adjustable/Directional Jets
  • Built-in Contoured Seat
  • Built-in Grab Bar
  • Secondary Locking Door
  • 38.5” Door Opening
  • 3652G seat height is 19" from the floor with up to 23" with the optional 10" leg extension
  • Integrated Seat Lift/Transport System
  • Included Anti-siphon valve for all jurisdictions
  • Colors: White or Bisque or optional custom color by request
  • Full immersion bathing in a seated comfortable position
  • Lifetime warranty on door seal gasket 

Specifications

IH3602GXL

IH3652G

Weight

 

 

Tub (shipping weight)

1,012 pounds (459 kg)

903 pounds (409 kg)

Tub (empty)

274 pounds (124 kg)

263 pounds (119 kg)

Tub (filled without user)

380 pounds (172 kg)

350 pounds (158 kg)

Floor Load Capacity

66 PSI (45 n/cm²)

66 PSI (45 n/cm²)

 

 

 

Minimum Space Requirements:

7 feet x 6 feet

Exterior Length/Interior Length:

72 inches/56 inches

67 inches/56 inches

Exterior Width/Interior (Seat) Width:

34 inches/23 inches

32 inches/26 inches

Overall Height/Rim Height: s

42.75 inches/35.5 inches

45 inches/35.5 inches

Side Access Door Swing:

40 inches

38.5 inches

Volume Capacity (without user):

64 gallons

Lift Base Clearance:

6 inches

6 1/4 inches

Whirlpool Motor (each):

115VAC, 60Hz, 0.7 Amps

Number of Jet Outlets:

4

Tub Material:

Double-wall gel coated fiberglass

Thermometer: 2 inch dial, 75° to 120° F (25° - 50° C)

2 inch dial, 75° to 120° F (25° - 50° C)

Anti-Scald Water Regulator:

Moen ExactTemp®

The Invacare® TheraPure™ tubs powered by SANIJET® Pipeless™ technology are the only long-term care tubs certified to meet the hospital-grade disinfection requirements of NSF International's Protocol P182, meaning TheraPure tubs offer the purest bathing experience available in long-term care. 

Pipeless technology offers benefits for both resident and caregiver.
• Superior infection control, easily cleaned with all wetted parts accessible.
• A quieter, more luxurious spa experience for the resident
• TheraPure pipeless tubs save water, chemicals and caregiver time 

Pipeless Purity Explained and Contrasted

 

Therapure TM  Tubs Featuring

SANIJET® PipelessTMTechnology System

Air and Bubble Systems

Water Purity

Invacare bathing systems are certified by NSF International for complete Level II EPAdisinfection under Protocol P182, ensuring elimination of 99.9% of bacteria – for clean and pure bathing water.

Testing found high concentrations of infectiousbacteria in 100% of piped whirlpools tested, including E. Coli, Staphylococcus, Legionella andPseudomonas from locations throughout the UnitedStates.

Cleaning Protocols

In approximately 5 minutes, every wetted component of our pipeless spa bath can be thoroughly cleaned to hospital-gradedisinfection standards (NSF international) after each use.

Recommended cleaning protocols like diluted bleach rinses and other techniques are ineffective, as they do not physically scrub clean the inner pipe and channel surfaces. To our knowledge, there is noscientific data proving the efficacy of these cleaningregimens.

Access to Wetted Surfaces

Every component that comes in contact withwater is easily accessible from inside the bath tub for quick and easy cleaning.

These systems contain jet bodies, air bubblers, airchannels, up to 30 feet of water or air piping, fittings,pumps and blowers. These hidden components trapbathing residue that can promote the growth ofinfectious bacteria and are inaccessible for properinspection and cleaning by hand.

Noise Level

At just 58 dB, pipeless jets function quietly andsmoothly for a more relaxing bath.

The higher decibel (dB) levels in piped whirlpools(68dB) and air bubble baths (77dB) create an unpleasant and noisy environment.

Superior Hydrotherapy

Our pipeless hydrotherapy system was developed to deliver an authentic spaexperience – pure, clean and ultra-quiet.

Most piped whirlpool tubs and air baths offer an assortment of jets and air holes to create“hydrotherapy”.

Spa and Bath Additives

Enjoy essential oils, bath salts, and

aromatherapy products. Residue can be completely removed with a simple, thorough cleaning.

Most piped whirlpool and air bath manufacturerscaution against using bath salts, oils or other additives as they build up in the piping and air channels, making an unsanitary system even worse.

Water Retention

Invacare baths retain less than 0.2

 fluid ounces – about a teaspoon – which is easily accessible for quick cleaning.

A typical piped whirlpool tub or air tub can retainmore than 13 fluid ounces of dirty bath water, which is inaccessible for cleaning. Bathers often feel this dirty water as a “cold water blast” when the system is activated.

Water Heat Loss

A typical pipeless spa bath loses only 1.5 F degrees of temperature in a 20 minute bathing cycle, almost imperceptible to the human body.

These systems can lose up to 8 degrees of heat in 20 minutes due to the injection of cool air, lengthyexternal piping and air channels. Expensive in-linewater heaters are required to attempt to maintainwater temperature for these systems.

 

This product is on our GSA contract V797P2147D 

Additional Information 

See the video for disinfecting the whirlpool tub  Here

Download the Silcraft tubs pictorial parts guide Here

Download the 2012 tub parts pictorial guide, Here

Download the 2013 parts pictorial guide Here

1stSeniorCare works to ensure your satisfaction with every purchase. 1stSeniorCare strives to make every purchase the right purchase for our customers.

 


Share this Product


More from this collection